FMP: Week Five
This week was dedicated to creating 3D models and developing my ideas further. I decided to use a laser cutter to practice cutting a stair case that could possibly be used for the entrance of my museum. It was extremely beneficial as far as manufacturing, as it ensured precision and worked on any material. However, it did produce some smoke and dust. Architects and Interior Designers often rely on 3D modelling to aid their projects which is why I worked in a similar way, as this enabled me to push my ideas closer to reality and since I was using a machine it was relatively a quick process. When cutting my cardboard I did face some difficulties as I didn't use the correct settings therefore, it engraved my design rather than cutting it. I used this is as a lesson and redone the process with the correct settings. Another advantage of using a laser cutter is that I could easily make any improvements or corrections if necessary.
Overall I believe that viewing a physical model was more satisfying then viewing a 2D drawing and enabled me to visually study the designs. From this task, I was able to conclude that I would make my final using a laser cuter due to its advantages.
For next few days I did more 3D modelling with simple geometric shapes including; pyramids, dodecahedrons and pentagonal anti prisms. My aim was to explore shapes that provide variation and beauty to structures in addition to architecture itself. From this task I began to directly see the link between maths and architecture, in particular when trying to understand the shape, size and angels of each part. It was from this task that I knew I would incorporate triangles into my final designs, as they would add strength and stability to my structure. This led me to look at the Louvre Pyramid located in Paris ,which is considered to be the worlds largest art museum. The structure is made from glass and metal poles as a form of support. I was captured by its unique design and it is clear that the space is more than just a living space but instead gives the mind and eyes something to enjoy, whilst serving as a piece of beautiful art. I aspire to work in a similar structural manor when making my own model.
I continued to generator my ideas surrounding the theme of triangular shapes and geometric patterns.
I began this by sketching
, as this has always been and will continue to remain an important part of any design process. Conceptualizing my idea on paper was useful when building towards my next successful design work and I ensured to develop each sketch in order to recognise any improvements that could be made and further small details that could added. I later transformed these designs into computer aided designs (Google Sketch-Ups) this allowed to navigate within my space and understand what scale to work . I tried to keep my ideas as simple as possible, with plain geometric forms and clean cut lines, as I believed that this would create the modern look I was aiming for.
WWW: This week was hands on and focused on developing my ideas towards a final outcome. Experimenting with my ideas both digitally and physically enabled me to reduce inaccuracy early on, which would potentially save me time in the following weeks to come.
EBI: When creating my cardboard models I could have paid more attention to small details, such as where the windows and doors would be placed, instead of just focusing on the basic form. As all these decision could potentially change my whole design.
CRIT: This weeks crit was presented differently and I only had to review my work to two of my peers, this saved time and enabled me to speed up my decision making process as I had less feedback to consider. It was beneficial because I was able to hear about other schemes and see other drawings in more detail, to ensure I was on the right track whilst allowing me to consider my approach and ways to improve it.
Overall I believe that viewing a physical model was more satisfying then viewing a 2D drawing and enabled me to visually study the designs. From this task, I was able to conclude that I would make my final using a laser cuter due to its advantages.
For next few days I did more 3D modelling with simple geometric shapes including; pyramids, dodecahedrons and pentagonal anti prisms. My aim was to explore shapes that provide variation and beauty to structures in addition to architecture itself. From this task I began to directly see the link between maths and architecture, in particular when trying to understand the shape, size and angels of each part. It was from this task that I knew I would incorporate triangles into my final designs, as they would add strength and stability to my structure. This led me to look at the Louvre Pyramid located in Paris ,which is considered to be the worlds largest art museum. The structure is made from glass and metal poles as a form of support. I was captured by its unique design and it is clear that the space is more than just a living space but instead gives the mind and eyes something to enjoy, whilst serving as a piece of beautiful art. I aspire to work in a similar structural manor when making my own model.
I continued to generator my ideas surrounding the theme of triangular shapes and geometric patterns.
I began this by sketching
, as this has always been and will continue to remain an important part of any design process. Conceptualizing my idea on paper was useful when building towards my next successful design work and I ensured to develop each sketch in order to recognise any improvements that could be made and further small details that could added. I later transformed these designs into computer aided designs (Google Sketch-Ups) this allowed to navigate within my space and understand what scale to work . I tried to keep my ideas as simple as possible, with plain geometric forms and clean cut lines, as I believed that this would create the modern look I was aiming for.WWW: This week was hands on and focused on developing my ideas towards a final outcome. Experimenting with my ideas both digitally and physically enabled me to reduce inaccuracy early on, which would potentially save me time in the following weeks to come.
EBI: When creating my cardboard models I could have paid more attention to small details, such as where the windows and doors would be placed, instead of just focusing on the basic form. As all these decision could potentially change my whole design.
CRIT: This weeks crit was presented differently and I only had to review my work to two of my peers, this saved time and enabled me to speed up my decision making process as I had less feedback to consider. It was beneficial because I was able to hear about other schemes and see other drawings in more detail, to ensure I was on the right track whilst allowing me to consider my approach and ways to improve it.
Comments
Post a Comment